S9 Pro Wearable Breast Pump - Long Battery
Support 7 pumping sessions
20% smaller motor to carry lighter
The LED screen reads easily
Seal-up connection for bigger suction
Lasts the Whole Day. Pump Anytime, Anywhere
S9 Pro hands-free pumps in a better efficiency with less time, saving more time for moms.
Baby-stimulation pumping mode encourages more letdown, and also brings less pain to nipples.
Low 50db sound to not wake the baby, silent use in the silent night.
Hospital grade 280～300mmHg suction range.
LED screen, easy reading even at night with one glimpse.
Auto 30mins shut-off when not operating.
Default Flange Size: 24mm
9 Adjustable Levels & 2 Modes
Bottle capacity: 180ml
Silent: Noise less than 50dB
Use Times: 6-8 pumping sessions
Shut time: 30 minutes auto shut off
Safe material, food-grade silicone
Charge time: about 2.5 hours, power adapter must be 5V-2A
Single Wearable Pump Kit
Pump Motor * 1
Milk Collector (180ml) * 1
Silicone Flange (24 mm) * 1
Silicone Diaphragm * 1
Duckbill Valve * 2
Linker * 1
Bra Adjustment Buckle * 1
USB Cable * 1
Storage Bag * 1
Double Wearable Pump Kit
Pump Motor * 2
Milk Collector (180ml) * 2
Silicone Flange (24 mm) * 2
Silicone Diaphragm * 2
Duckbill Valve * 4
Linker * 2
Bra Adjustment Buckle * 2
USB Cable * 2
Storage Bag * 2
Wear it Anywhere
Quiet, Streamlined and Petite
Upgraded with smaller size by 20%, this S9 Pro wearable breast pump is as light as an apple to feel no burden or bulge in bra.
No messy or tangled cords to hold you back or get in the way, you can pump completely hands-free anytime, anywhere. A better way to pump at home, at work, or on the go.
Pump Wherever, Whenever.
24 Hours on One Charge
One day one charge for a whole day outdoors. Equipped with a bigger capacity battery and fast charging Type-C charging port, this S9 Pro wearable pump only takes 2.5h to be fully charged for 6-8 pumping sessions total of 180 mins of pumping.
Auto shut-off after 30mins further minimizes the worries.
Tips: Recommend using 5V-2A Power adapter for charging
2 Modes & 9 Suction Levels
Intuitive and Customizable
S9 Pro breast pump owns 2 modes of expression and mixed suction with 9 intensity levels for each, which stimulates the natural baby’s sucking rhythm and increases milk production, allows moms to get more milk in a shorter time.
The LED screen is super easy to read even at a glimpse, which makes pumping at night easier along with a waking-no-baby 50db sound.
Easy to Use and Clean
Being the winner of Reddot Winner 2022, S9 Pro hands-free pump boasts construction and design patterns, along with whole food-grade safe silicone material approved by FDA.
Takes less than a few seconds to put a wearable pump inside your bra and start milking. One click on/off construction is easier to be disassembled for cleaning.
Tips: it’s recommended to pump the milk not over 120ml lines of the milk cup, also measure your nipple size and choose the right flange size before pumping. Unsure of your size? Check out our exclusive guide
Frequently asked questions
Compare the S9
1 - The motor more smaller - Upgraded with smaller size by 20%；
2 - Longer battery life: S9 fully charged for 4-5 sessions pumping，S9 Pro fully charged for 6-8 sessions pumping；
3 - From the original 5 suction levels into 9 suction level;
4 - Increase the LED display, more clear and easy to use
5- Add installation in place beep
We have such a guide exclusively to solve this problem of moms, you can check the guide on how to measure your flange size.
Please note, your breast size may change before pumping and after pumping, so please measure your size when you start pumping or the flange size may not be appropriate for you.
Our hands-free breast pump is designed to be worn with your standard nursing bra. For a better pumping experience, make sure there is no space between the breast pump and your breast, and it cannot be moved easily.
If your bra isn't flexible enough, you can use a bra adjuster to create more room.You can find Momcozy's nursing bras here
* Washable parts:
1. Rinse all separated parts that come in contact with breast and breast milk in 25-30 °C (77-86 °F) water to remove breast milk residue.
2. Once rinsed, parts that have touched the breast or breast milk should be placed in a clean wash basin used only for washing infant feeding equipment.
・Soak all washable parts in 40-60 °C (104-140 °F), soapy water for 3~5 minutes.
・Wash each part with a clean dishcloth or soft brush.
・Rinse all separated parts with clear water.
3. Place parts on a clean surface or towel.
・Allow all parts to air dry.
・Store dry parts in a clean, cool place when not in use.
・Do not store wet or damp parts.
Caution: Only use drinking-quality water for cleaning.
Some breast pump accessories do need replacing regularly to maintain performance. If you notice that your pump seems to have lost suction, the first thing you should do is take a look at your parts, particularly the valves, and inspect for wear, fraying, or stretching and replace if needed.
1. Valve membranes and duck valves need to be replaced every 2 months;
2. Backflow protector diaphragms need to be replaced every 3 to 6 months
3. Replace breast shields every 6 months