The Momcozy Mobile Flow™ Hands-Free Breast Pump | M9 takes care of the pumping work, but settling comfortably in your bra is where your bra steps in. The flange has to lie flat against your breast, and the cup has to fit your milk collector so it stays in place during collection. That's the part worth paying attention to when choosing a Momcozy bra for M9.
The Jelly Strip Seamless Nursing Bra offers flexible, wire-free support for the M9 pump. A good fit helps keep the pump comfortably in place, whether you purchase the bra on its own or as part of a bundle.
What Is the Momcozy M9?
The Momcozy Mobile Flow™ Hands-Free Breast Pump | M9 keeps the entire pumping setup inside your bra, with no external tubing or separate motor to carry. It has a drop-shaped design that follows the breast's contour, while its app controls let you adjust pumping settings without reaching inside your bra.
A closer look at the Momcozy M9's features:
- DoubleFit™ flange: A mixture of soft and firm silicone to give a tight seal against the breast. It's equipped with a 24 mm flange and 17 mm, 19 mm, and 21 mm inserts.
- Five pumping modes: Stimulation, Expression, and Mixed modes are included right on the pump, and Milk Boost™ and Milk Relief™ are available via the Momcozy app.
- 15 suction levels: Gives you options to set the suction power according to your comfort level.
- Individualized app settings: Customize the settings of your pumping with MyFlow™, change them remotely, and monitor your milking production.
- 150 mL (5.1 oz) milk collector: Holds the expressed milk in the milk pump and is flat on the bottom to stand upright when taken out of the milk pump.
- Rechargeable battery: Will run up to 150 minutes or 4-5 sessions per charge, then turns off automatically after 30 minutes.
You can also find assistance in planning your sessions with Momcozy's M9 pumping schedule guide, which outlines a schedule for exclusive pumping, combining pumping and breastfeeding, and using Momcozy's M9 with a wall pump.
Best Bra for the Momcozy M9: Jelly Strip Seamless Nursing Bra
The Momcozy M9 sits directly inside your bra, making the cups responsible for holding the milk collector against your breast. That calls for a little more flexibility than a regular nursing bra, without giving up the support you need when the pump is removed.
The Momcozy Jelly Strip Seamless Nursing Bra is made for both nursing and wearable pumping. In place of the traditional underwire, it features Jelly Strip Technology, which allows for flexible support and stretchy cups that can fit the M9 pump.
Why the Jelly Strip Seamless Nursing Bra is an ideal fit for the Momcozy M9?
- Jelly Strip Technology: With bonded support strips, it provides 360-degree support all the way around the breasts without using rigid underwires.
- Soft and stretchy material: The material is nylon and spandex[a][b], which allows the cups sufficient stretch to fit the pump and accommodate breast size changes.
- Pump-friendly design: Assists in keeping the M9 pump on your breast without the need for a separate pumping bra.
- Adjustable fit: Shoulder straps and an included matching bra extender let you adjust the support and band fit.
- Easy nursing access: One-handed nursing clips make it easy to open the cups for nursing without having to remove the pump.
- Special comfort features: Partially sewn-in padding keeps the bra from shifting, and the scalloped edges and seamless finish prevent the bra from looking raggedy under clothes.
The appeal is being able to use the same bra beyond pumping sessions. You can remove the Momcozy M9 and continue wearing it for nursing or everyday activities, without changing into another bra.
For moms who pump several times a day, that kind of practicality is worth considering. Momcozy's guide to nursing bras for exclusive pumping also covers what to look for in a bra you'll be wearing through repeated pumping sessions.
Jelly Strip Seamless Nursing Bra Size Chart: Find Your M9 Bra Size
Your bra should fit comfortably before you add the Momcozy M9 pump. Sizing up just to make room for the milk collector isn't always necessary, since a loose band can make the pump harder to support.
The Jelly Strip Seamless Nursing Bra comes in sizes S to 3XL, with Plus options for fuller cups. Check your current US band and cup measurements against Momcozy's official size guide.
|
US band size |
B cup |
C cup |
D cup |
DD/E cup |
DDD/F cup |
|
30 |
— |
S |
S |
— |
— |
|
32 |
S |
M |
M |
M Plus |
M Plus |
|
34 |
M |
L |
L |
L Plus |
L Plus |
|
36 |
L |
XL |
XL |
XL Plus |
XL Plus |
|
38 |
XL |
2XL |
2XL |
2XL Plus |
2XL Plus |
|
40 |
2XL |
3XL |
3XL |
3XL Plus |
3XL Plus |
|
42 |
3XL |
— |
— |
— |
— |
How to choose your size
If your breast size has changed due to breastfeeding or pregnancy, take new measurements. Use a measurer to find the band size just below the bust line and cup size at the widest part of your chest.
As a reference point, a 34C means Large and a 34DD means Large Plus. Plus is an option that provides additional cup size, but it doesn't step up the band size.
Your measurements may still change while you are breastfeeding. Momcozy's guide on when to buy nursing bras reveals how these changes impact the size and when it becomes necessary to re-measure.
Adjust the fit prior to using the pump
First, try on the Jelly Strip Seamless Nursing Bra. The band should remain flat along your ribs, and there shouldn't be any big gaps in the cups. The additional extender can be used for additional band room, but cannot correct a too-small cup. Once the bra fits, check how it accommodates the Momcozy M9 pump.
Also, bra size and flange size are different. The chart will guide you in selecting your nursing bra, and the M9 flange or insert size will rely on the measurements of your nipples. They both must be the right size for comfortable pumping.
How to Wear the Momcozy M9 With Jelly Strip Seamless Nursing Bra, Step by Step
The Momcozy M9 should be placed before the bra has snugged it into place. This makes it easier to verify the flange alignment and eliminates the need to make adjustments after the pump has been inserted into the cup.
These steps follow Momcozy's official M9 assembly instructions and wearable pump preparation guide.
Step 1: Assemble the Momcozy M9
Clean, dry, and cool the milk contact surfaces and wash your hands before assembly.
Check that the diaphragm and duckbill valve are properly fitted. Turn the milk collector cap towards the lock symbol to close the collector, then attach the flange tightly to the collector. Attach the motor to the assembly and, if necessary, insert the flange insert that is the correct size.
Before wearing the pump, ensure that it is all properly attached.
Step 2: Put on the Jelly Strip Seamless Nursing Bra
Wear the bra and adjust the shoulder straps to make it supportive but not digging. The band should be snug around your rib cage.
Lay the Momcozy M9 in the cup, but not so tightly that it is stretched. Small adjustments of the straps can be made after the pump is in place.
Step 3: Position the pump and center the flange
Slightly slant forward and leave space in the bra cup. Place the M9 pump assembly against your breast and the silicone flange inside.
Make sure your nipple is in the middle of the flange tunnel and not touching the sides before you secure it in place. It is important that there is no gap between the flange and your skin.
Step 4: Secure the M9 inside the bra
Slowly move the bra cup around the pump, maintaining the milk collector's erect position. Use straps to adjust the pump to fit against the breast, but not to squeeze it.
Make sure the pump is secure, and that the cup isn't shoving the pump to the side. A secure fit should not be too tight.
Step 5: Start pumping and adjust the settings
Start Momcozy M9 at the lowest suction level in Stimulation mode. Switch to Expression mode when milk starts flowing or make your preferred settings on the Momcozy App.
Only increase the suction to a comfortable level. A stronger suction doesn't always equate to more milk.
Maintain an upright position when pumping; otherwise, you risk leaks. Stop and adjust the flange alignment and bra fit if discomfort or pinching occurs.
Step 6: Remove the pump and clean the parts
Gently remove the M9 pump after turning it off. Carefully remove the flange seal and place the collector upright to prevent milk from spilling.
After expressing milk, put it in a clean container for storage before taking the milk-contact components apart for cleaning.
Cleaning the following parts after each use is recommended by the CDC's breast pump cleaning guidelines. Follow instructions Momcozy provides for cleaning and do not immerse the pump motor or charging components in water.
Once you've removed the pump, you can continue wearing the Jelly Strip Seamless Nursing Bra for nursing or everyday use.
Momcozy M9 Bra Bundle vs. Buying Separately
Already have the Momcozy M9 pump, or still putting together your pumping setup? That makes a difference when choosing between the bundle and buying separately.
The Momcozy M9 Bra Bundle includes two wearable breast pumps and one Jelly Strip Seamless Nursing Bra, with your preferred bra size selected at checkout.
Here's how the options compare:
|
Buying option |
What’s included |
Best suited for |
|
Momcozy M9 Bra Bundle |
Two Momcozy M9 wearable pumps and one Jelly Strip Seamless Nursing Bra |
First-time M9 buyers who want a double-pump setup with a compatible bra |
|
Buy separately |
Momcozy M9 pump or pump set and Jelly Strip Seamless Nursing Bra purchased individually |
Moms who already own the pump or need an additional nursing bra |
The bundle brings everything together in one purchase, though it includes only one bra. Already own a Momcozy M9? Pick up the Jelly Strip Seamless Nursing Bra on its own and skip the cost of a second pump.
Conclusion
While your pumping session is over, that doesn't mean that you need to change your bra. The Jelly Strip Seamless Nursing Bra is created for use with the Momcozy M9 when you're pumping, and once the pump is removed, it is designed to be comfortable when you're nursing.
When selecting a Momcozy bra for M9, think of how it feels not only while you are using it, but also during the rest of the day. Having a firm fit to the pump and comfortable support following it can ease the transition from pumping to nursing.





