MOMCOZY

Getting started takes just a few steps — and the see-through AquaClear water chamber means no measuring cup, even at 3 AM.

1. Fill water directly in the transparent water chamber according to the scale markings for your mode — no measuring cup needed.
2. Plug in the warmer.
3. Place the bottle inside upright.
4. Short press the start/stop button to select bottle material, mode, and milk volume.
5. Press start/stop again to begin heating. The Momcozy NightPro Baby Bottle Warmer counts down automatically, beeps three times when done, and keeps milk warm for 1 hour.
6. Swirl gently to distribute heat evenly, then test a few drops on your inner wrist before feeding.

If you don't press start after selecting settings, the warmer automatically begins heating after 15 seconds — a helpful feature during late-night feeds.

The momcozy milk warmer heats a 4 oz bottle in approximately 3 minutes using precise water bath warming. Larger volumes take longer — an 8 oz bottle typically takes 6–8 minutes. Actual time varies based on starting temperature and bottle material.

Water bath heating surrounds the bottle evenly on all sides, helping reduce hot spots and protecting the nutrients in breast milk. Always swirl before feeding to ensure consistent temperature throughout.

Bottles up to 82 mm (3.2 inches) in diameter fit comfortably. The warmer adjusts heating time based on the milk volume you select (2–11 oz / 59–325 ml). Always select the correct bottle material (Plastic / Glass / Silicone / Bag) — choosing the wrong material can result in overheating or insufficient warming.

Yes — the Momcozy NightPro automatically enters a 60-minute keep-warm cycle after heating completes, ideal for unpredictable baby sleep schedules and night feeding routines. For best quality, remove the bottle within 30 seconds of the completion beep. Once warmed, offer breast milk to your baby within 1–2 hours, and never return warmed milk to the refrigerator.

You don't need to descale it often. The transparent AquaClear chamber lets you spot any mineral buildup at a glance, and the Easy-to-Clean Teflon coating on the heating plate resists residue, making everyday maintenance simple.

For everyday cleaning:

1. Unplug and allow the warmer to cool completely.
2. Pour out any remaining water.
3. Remove the heating plate isolation bracket — rotate to the unlock position and lift out — then rinse.
4. Wipe the interior with a damp cloth. Avoid abrasive cleaners, antibacterial solutions, chemical solvents, or sharp tools.

For mineral deposits (hard water areas):

Mix equal parts white vinegar and water, add to the chamber, let sit for 15–20 minutes, then wipe clean and rinse thoroughly.

A quick wipe after each use keeps your Momcozy NightPro clean, hygienic, and ready for the next feeding.